Adopt a Rush repository
@putnami/rush turns each project of a Rush repository into a Putnami
project, in one of two modes:
| Mode | Who runs the tasks | Who installs | Whose cache |
|---|---|---|---|
import |
Putnami, through @putnami/typescript, for each script it runs with the same tool; rushx <script> for the others |
Putnami, with Bun | Putnami's |
delegate |
Rush: rush build --to <package>, rush test or rush lint --only <package> |
Rush | Rush's build cache |
Adopt it
@putnami/rush is not published yet: until its first release, putnami init --from rush stops at the extension install, after it has written the
workspace files, and a workspace loads the extension from a source checkout.
At the root of the repository, where rush.json lies:
putnami init --from rushIn a terminal, init asks the mode, with import preselected. Without a
terminal, such as in CI or under an agent, it imports. --mode import or
--mode delegate skips the question. init records the mode under
options["@putnami/rush"].mode of putnami.workspace.json, declares and
installs @putnami/rush, and runs putnami projects sync. In import mode,
the sync declares @putnami/typescript only when a script moves to it, and
init then installs it. When no script moves, init installs nothing more,
leaves Rush's lockfile as it was, and says that --mode delegate gives the
same result. The sync reads that mode, import when it is absent. A value other than import or delegate fails the sync and the probe with
stacks.adoption_mode_invalid. In both modes,
each edge the sync writes is attributed to Rush's project graph
(build-graph), as a delegated stack's are, so workspace.declared_edge does
not warn about it and putnami deps prune leaves it in place. In import mode
the probe attributes the edges of a project whose scripts all move to
@putnami/typescript without claiming the project, so an edge to a
devDependencies package no source imports, such as a build tool, keeps
ordering the build.
Run again in the adopted workspace, putnami init --from rush writes nothing:
it prints the diff of each file the sync would change. --apply writes them.
putnami init --from rush --mode <mode> --apply switches mode: the sync
replaces the other mode's extension in each project's putnami.json, with the
test and lint entries and the file patterns delegate mode wrote.
Add .putnami/ and .gen/ to the repository's .gitignore: init writes
one only when the repository has none.
What the sync writes
putnami projects sync runs the extension's sync task. It reads rush.json
and each project's package.json, as putnami observe does: a project depends
on another when a dependency of its package.json names it with the
workspace: protocol or a range its version satisfies, unless
decoupledLocalDependencies lists it. Then it writes in each project's
putnami.json:
| Member | Delegate mode | Import mode |
|---|---|---|
extensions |
@putnami/rush |
@putnami/typescript, beside @putnami/rush when a script stays on Rush |
dependencies |
the project IDs of the Rush projects it depends on | the same |
options["@putnami/rush"].filePatterns |
rush.json, command-line.json and the Rush lockfile, so a lockfile change runs every project |
none |
options["@putnami/rush"].tasks.<task> |
none | rushx <task> in the project's directory, for each script that stays on Rush |
disable.jobs |
test and lint when command-line.json declares no bulk or phased command of that name |
build, test or lint without a script of that name, and each task qualified by the extension that does not run it, such as @putnami/rush:test for a Jest test that moved and @putnami/typescript:build for a webpack build that stays |
commands.<task>.dependsOn |
build for test or lint when its phased command reaches an upstream phase |
^build for a project that builds; build and ^build for test or lint when its phased command reaches an upstream phase |
It writes a file only when a member it owns changes, and keeps every other
member. In delegate mode it removes the extension and its edges from a project
that rush.json no longer lists. An import retracts nothing: Putnami owns the
projects from then on.
The sync writes nothing it cannot map, and lists it instead:
- each
command-line.jsoncommand other thanbuild,testandlint, and each global command: it keeps running through Rush; - in import mode, each project script other than
build,testandlint: run it withrushx <script>; - in import mode, each
build,testorlintscript whose tool@putnami/typescriptdoes not run, with the reason: it keeps running withrushx; - in delegate mode, the projects whose test task names no report.
Delegate mode
Each task checks that the Rush banner of rush --help reports the
rushVersion of rush.json, then runs at the workspace root, for one project:
| Command | Step |
|---|---|
putnami build |
rush build --to <package> |
putnami test |
rush test --only <package> |
putnami lint |
rush lint --only <package> |
Putnami's cache is off for every task, and its result records
delegatedTo: rush. Putnami selects what a change affects: a changed project
and the projects that depend on it run, and a project it depends on runs no
task of its own. rush build --to also builds the projects upstream of the
one it names, because a build needs their outputs; Rush's build cache makes
that cheap. That cache is opt-in: when common/config/rush/build-cache.json
does not set buildCacheEnabled to true, the sync warns that each delegated
build reruns its upstream projects. rush test --only and rush lint --only
run on the named project alone, against the upstream outputs already on disk:
a lint or a test of one project never lints or tests the projects it depends
on.
A test or lint that command-line.json declares as a phased command, one
of whose phases depends on an upstream phase, as rushstack's _phase:build
does, waits for the project's build task: rush test --only and
rush lint --only skip the upstream phases, and rush build --to <package>
runs them first. The sync writes that order as
commands.<task>.dependsOn: ["build"] in the project's putnami.json; a bulk
command waits for nothing.
putnami validate fails with rush.sync_stale when a project's
putnami.json no longer matches rush.json and the project manifests, such as
after a dependency change that alters the edges. Run putnami projects sync
and commit the result.
Test reports
Rush has no report convention, so the test task reads the reports a project
names under its putnami.json:
{
"options": {
"@putnami/rush": {
"tasks": {
"test": {
"reports": {
"junit": ["temp/junit.xml"],
"coverage": [{ "format": "lcov", "paths": ["temp/coverage/lcov.info"], "optional": true }]
}
}
}
}
}
}A failed case fails the task. Without reports, the task's result is the exit
code of rush test alone.
Import mode
A project one of whose scripts moves becomes a @putnami/typescript
project, and an import never changes the tool that checks the code (D-070):
a project none of whose scripts moves runs on Rush alone. A build, test or lint
script moves to Putnami's TypeScript task only when that task runs the same
tool: bun build or tsc alone, bun test, Vitest or Jest with no argument
that picks a configuration or a subset of the suite, Biome or a bare
eslint, with no other command chained. The task then runs that tool, under
Putnami's cache: a Jest suite keeps Jest and its configuration. A script that
runs another tool, such as mocha, webpack or an ESLint with arguments,
keeps running as the repository wrote it, with rushx <script> in the
project's directory: rush must be on PATH at the rushVersion of
rush.json, and the result records delegatedTo: rush. The probe answers a
project only when its putnami.json names @putnami/rush, that is when one
of its scripts stays on Rush. The TypeScript
extension's install runs rush install, which keeps Rush's lockfile under
common/config/rush and links each project's dependencies; it writes no root
package.json. A root package.json that declares packageManager selects
that manager instead. A hosted run does not install a Rush repository.
An imported build keeps Rush's order: the sync writes
commands.build.dependsOn: ["^build"] in each project that builds, so its
build, whether rushx build or the TypeScript build, waits for the build of
each project it depends on. A test or lint whose phased command reaches an
upstream phase also waits for the project's build and the upstream builds
(["build", "^build"]). A task that waits for a build kept on Rush folds that
build's would-be key into its own: an edit to the upstream sources moves it.
A lint script that moves and passes no write flag (--write, --fix,
--apply) moves with fix: false in options["@putnami/typescript:lint"]:
it checks and rewrites no file. When a Biome lint moves and the repository
root holds no biome.json or biome.jsonc, the sync writes a root
biome.json that sets nothing, so the lint keeps Biome's defaults, and lists
it.
An import also adopts Putnami's TypeScript conventions (D-066), so each project builds and resolves its neighbours from their sources:
- A
package.jsonwhosebuildscript moves to the Bun build, that declares noexports, whose top-levelmainortypesnames a file outsidesrc/such as Rush'slib/index.js, and whose project holdssrc/index.ts, gains"exports": { ".": "./src/index.ts" }after that member. Every other byte stays. A projectrush.jsonpublishes, withshouldPublishor aversionPolicyName, keeps its entry, sincerush publishships it to consumers that read the build output. Putnami's Bun build does not write that output, so the project'sbun buildstays on Rush, run withrushx build, and the sync lists it with its reason. So does the build of a manifest the sync cannot edit line by line, such as one with CRLF line ends, one whoseexportsname a build output, and one with nosrc/index.ts. - A
tscbuild, or a build that stays on Rush, writes the output itsmainnames, so its entry stays. - A project with no
tsconfig*.jsongets atsconfig.jsonthat extends the root's, which the TypeScript install writes. A project that holds anothertsconfig*.jsonkeeps its configuration, which Jest or ESLint may read.
The sync warns about each file it writes, and a rerun of putnami init --from rush shows their diffs.
putnami validate fails with rush.sync_stale in import mode too, when a
putnami.json no longer matches rush.json, the project manifests or their
scripts. putnami init --from rush --mode delegate --apply removes
@putnami/typescript from the workspace once no putnami.json names it.
What it does not do
- Install or switch Rush: the version check compares and never installs.
- Rewrite
rush.json,command-line.json, or a project'spackage.jsonbeyond theexportsan import adds: an import never rewrites a script. - Map subspaces, version policies,
rush publishorrush version: they keep running through Rush.